Saniflo Saniplus Macerating Series Pump Only
Saniplus Macerating Series Pump Only
Saniplus Macerating Series Pump Only
Saniplus Macerating Series Pump Only
The Saniplus is a system that is used to install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. The macerating system of the Saniplus can handle up to four fixtures, toilet, hand basin, shower and bathtub. The Saniplus toilet uses only 6 liters (1.6 USG) of water per flush.
The Saniplus is simplicity itself to install; there are just four connections.
- The macerating pump is connected to the spigot of a horizontal outlet toilet.
- The toilet tank is connected to the water supply.
- The macerating pump is connected to the small diameter discharge pipe work.
- The macerating pump is connected to the electrical supply.
The Saniplus macerating system is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and pump. A normal operating cycle for Saniplus takes about 10–20 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal.
SaniAlarm has a level pressure switch that triggers an alarm fixed on the top of the unit if the volume of water exceeds the maximum allowed level. The alarm emits a continuous 80 dB warning sound, until it is switched off and the problem rectified.
SaniAlarm is battery operated and can be fitted on most models* in the Saniflo range, including Sanispeed and Sanivite pumps.
Dimensions: 12" H x 21" W x 8" D
Amperage: 4.0
Voltage: 110
HP: .4
