Saniflo Saniplus Macerating Series Pump Only
Saniplus Macerating Series Pump Only
Saniplus Macerating Series Pump Only
Saniplus Macerating Series Pump Only
The Saniplus is a system that is used to install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. The macerating system of the Saniplus can handle up to four fixtures, toilet, hand basin, shower and bathtub. The Saniplus toilet uses only 4.8 liters (1.28 USG) of water per flush.
The Saniplus is simplicity itself to install; there are just four connections.
- The macerating pump is connected to the spigot of a horizontal outlet toilet.
- The toilet tank is connected to the water supply.
- The macerating pump is connected to the small diameter discharge pipe work.
- The macerating pump is connected to the electrical supply.
The Saniplus macerating system is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and pump. A normal operating cycle for Saniplus takes about 10–20 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal.
SaniAlarm has a level pressure switch that triggers an alarm fixed on the top of the unit if the volume of water exceeds the maximum allowed level. The alarm emits a continuous 80 dB warning sound, until it is switched off and the problem rectified.
SaniAlarm is battery operated and can be fitted on most models* in the Saniflo range, including Sanispeed and Sanivite pumps.
Dimensions: 12" H x 21" W x 8" D
Amperage: 4.0
Voltage: 110
HP: .4
